performance of automatic cnc pipe end forming machines The main circuit is controlled by PLC programmable controller. Automatic feeding, clamping, cutting system, accurate and fast feeding. So what are the precautions in safe operation?

1. Wear personal protective equipment correctly. For example, when cutting pipes, female workers are required to wear protective caps, and if they do not wear them, they can curl their hair in. At the same time, it is required not to wear gloves, such as the rotating part of the performance of automatic cnc pipe end forming machines will roll the gloves into the machine, which is easy to cause hand injuries.

2. Before starting, check the safety of the pipe cutting equipment, run the empty car first, confirm the normal, and then put into use.

3.performance of automatic cnc pipe end forming machines During operation, safety checks should also be carried out in accordance with regulations. Especially for fasteners, check whether they are loose due to vibration and re-tighten in time.

4. When the equipment fails, it must not be used together to avoid accidents.

5. When the pipe cutting machine is running, it shall not be adjusted by hand, or measured by hand, or lubricated, cleaned up debris, etc. If necessary, turn off the machine immediately.

6. performance of automatic cnc pipe end forming machines The tools, clips and processed parts used must be firm and must not be loosened.

7. Mechanical safety devices must be used correctly in accordance with regulations and must not be disassembled.

8. When the pipe cutting machine is working, the operator can not leave the work post to prevent it from being disposed of in case of accidents.

9. After the work is finished, turn off the machine, leave the workbench, clean the workbench, sort out the pipe cutting fittings, jigs, etc., and clean the health of the pipe cutting machine equipment.

performance of automatic cnc pipe end forming machines https://www.john-sheng.com/CNC-Tube-End-forming